Pharmaceutical PACKAGING LINES...

CONTACT: Leonard B. Antosiak - Pharmaceutical Production TechSourceŽ - P.O. Box 1145 -
Ann Arbor, MI 48106-1145 - (Telephone: 734.528.0444) - (eMail: ppt@2020comm.net) - (WEB PAGE: http://PharmaceuticalProductionTechSource.com)

Pharmaceutical PACKAGING LINES...

PACKAGING LINES...
and Line Maintenance and Line Equipment Tips
(Quality pre-owned/used packaging lines!)

The following packaging lines and information are addressed on this page: NEW and Used/Preowned Packaging Lines: Bag-and-Box; Blister/Thermoformer, Bottle Counting Line, Bottle Filling, Case Packaging Lines, Filling Lines, Form/Fill/Seal, Gummy, Inspection, Liquid Filling, Pouch Lines, Powder Filling Lines, Sachet and Packet Filling Lines, Suppository Lines and more! Please note on a typical bottling line, some pieces may not be available at the time of customer order. Some pieces of the line may be sold on a first come - first served basis.

Troubleshooting Tips for:
"Pharmaceutical Packaging Line Maintenance Tips" and "Maintaining Packaging Line Equipment Tips" are listed at the bottom of this page.

Bag-and-Box Lines...
are Listed Below by Company Name in Alphabetical Order:
(for pictures and information please send an email to ppt@2020comm.net, or, call us at 734.528.0444):

Pattyn Automated Packaging System

Equipment information: 300 parts per minute and has a capacity of 440 parts per box; combination case erector and bag inserter MTM12; driven roll conveyor; bag decuffer folder (American); 31 case closer tape; driven roll conveyor; case conveyors instead of box flow; robotic palletizer; pallet conveyor; perimeter safety fencing; 750mm zone x 2; decline belt conveyors; pop-up transfer; lower conveyor: 30 meters of conveyor (20 zones of 1,500mm); 24 meters of conveyor (16 zones of 1,500mm); overhead conveyor: 30 meters of conveyor (20 zones of 1,500mm), 22˝ meters of conveyor (15 zones of 1,500mm); extended legs; pop-up transfer, 750mm zone x 1, 1,050mm zone x 1 (650mm W); pop-up transfer, 1,500mm zone x 2; decline belt conveyor, 750mm zone + 90 curve + 525mm zone + 90 curve + 1,050mm zone, power supplies and electrical controls; TIJ Printer 6 with side-mount stand; barcode scanner; ID Tech Labeling machine (model 252) with stand

(used/preowned/built 2022)-ae73284001

Pearson Robotic Top Load Case Packing, Erecting and Sealing Line

Model: RTL-MX

Equipment information: Fanuc Robots; Pearson (model CE25-T) automatic case erector and bottom taper sealer and a Pearson CS-25T top case sealer; erector is capable of speeds up to 25 cases per minute; case size range: knocked down flat: L 13in. to 40in. x H 8in. to 26in.; bottom flap of 2˝in. to 8in; formed case: L 8in. to 24in. x W 5in. to 16in. x D 3in. to 18˝in.; open depth top flaps up 5˝in. to 21in. with Allen-Bradley CompactLogix PLC and Dekka tape heads; Pearson RTL-MX Robotic Loader with Fanuc (model M710iC/50) Robot with R-30iB controller; Allen-Bradley CompactLogix PLC and Allen-Bradley HMI; includes Pearson (model CS25-T) Automatic Tape Top Case Sealer; capable of speeds up to 25 cases per minute, depending on application and case size; case size range: L 8in. to 24in. x W 5in. to 16in. x H/D 7in. to 22žin.; last used in pharmaceutical packaging operation

(used/preowned/built 2020)-ae72850004

Blister/Thermoformer Lines...
are Listed Below by Company Name in Alphabetical Order:
(for pictures and information please send an email to ppt@2020comm.net, or, call us at 734.528.0444):

Klockner Blister Packaging Line

Model: CP 1200

Equipment information: blister filler sealer (model P3000); cartoner (CP1200); manuals included

(used/preowned/built 2000)-f3109-10

Mactec Blister Packaging Line

Model: Nano60X

Equipment information: custom built machine; approximately 40 hours of run time; varying speeds, on average can produce 20 to 25 finished blister packs a minute, but can fill 5 to 35cpm, product depedent; AutomationDirect touchscreen controls; product sizing 2.75in. aprroximate 3.75in.; 15 gallon kettle with 5 valves on the manifold/pumps to deposit gummies directly into the blister packs; plastic goes straight into a forming station, then gummy is filled in the filling station, sealed in the sealing station then is cut at the cutting station; custom printer that can print black and white right on the package (option can be blank as well); pumps are adjustable from 1gram to 10 grams, presently the blister and forming station makes 3gram gummies (can be retrofitted for different sizes/shapes through the manufacturer); presently for circular gummies with changeable inserts (gummy impressions in some states require THC impressions on each gummy); CE marked; (pallets of the plastic and the silver lidding foil as well if needed); air requirements: 5 to 35 cu.ft./min.; overall dimensions: 42in. x 28in. x 78in.; approximate weight: 575lbs.

Electrical: 110v/15 amps, not including kettle volts

(used/prowned/built 2021)-e894663

Multivac Stainless Steel Rollstock Thermoformer

Model: R530

Equipment information: production speed: up to 20 cycles per minute, depending on application; with preheat and plastic trim; film specifications: roll W 528mm, advance 228mm; die section: L 236.5mm x W 516mm; extra due set included; trim station with discharge bin; preheat station. s/s construction; mounted on screw leveling legs; operator control screen interface mounted on a swivel arm for easy access around the machine; last application was pharmaceuticals: 525mm lower web and 510mm upper web with a 228mm advance; individual product dimensions: L 82mm x W 79.8mm

Electrical: 220v/3ph/60hz/68 amps

(used/preowned/built 2011)-sE314099

Pentapack Hospital Blister Line

Model: HP500

Equipment information: unit dos packaging machine; 10 to 50 cycles per/minute capability, 86mm maximum forming W, 25mm transport L; 100mm maximum foil W; 14mm maximum forming depth; 3 temperature controls; sealing station; thermoforming station; transport station; cutting station; forming and lidding decoiler; fixed manual feed table; production and speed counter; perforation/pressing station; thermotransfer printer TEC; liquid dosing unit; s/s and anodized aluminum construction; Siemans touch screen controls; E-Stop button; air requirements: manuals included; 115psi, 14cfg air consumption; previously used in pharmaceuticals

Electrical: 110v/60hz/3kva

(used/preowned/built 2010)-ae73010001

Uhlmann Thermoforming Blister Packaging Line

Model: UPS4 ETX

Equipment information: rated up to 50 cycles per minute, product dependent; dual pick-and-place style feeding stations; vision system; deep draw design; 140mm x 39mm maximum blister format; rated up to 150 cartons per minute, Uhlmann C2155 cartoner, 115mm x 100mm x 170mm maximum carton size; rated up to 10 cases per minute, Uhlmann E4040 case packer; stack light; E-Stop button

(used/preowned)-ae70053050

Uhlmann Thermoformer Dermal Patch Line

Model: UPS5 ET

Equipment information: nominally rated 15 cycles per minute, or 35 cycles per minute at 10mm depth, 216mm index L, 267mm forming web W; 2 x 85mm seal web W; 3mm form depth; 1,199mm x 209mm punching area; 73mm fleece web W; 61.8mm D fleece punch area; .1mL to 6mL doing range with 80 mL holding tank (machine# 129) built in 2011; dual Ismatec peristaltic feel pumps, Visiotec vision system (model Visioread serial# 1420129), built 2016; Koch fleece feeding device with 4 station unload reels (serial# A10-0140) built 2010; Trankner blister bundler cartoner (model ST-E200-14 ELEVATOR, serial# 10090), built 2011; KKT Kraus chiller for cold forming; visiotec pinhole detection system

Electrical: 400v/3ph/60hz

(used/preowned/built 2011)-f3571-1

Unifill Blister Packaging Machine

Model: TR86

Equipment information: roll dimensions: W 13˝in. x D 18in.; dye dimensions: W 13˝in. x H 7in.; seal jaw L 13˝in.; filler station: 12in., 1in. tri-clamp connection; includes laser engraver; conveyor L 12ft. x W 5in.; dye cutter W 11˝in.; discharge conveyor: L 41in. x W 10in. x H 16in.; Accu chiller Thermal Care; button controls

(used/preowned)-sE15970

Unifill Single Dose Thermoformer, Filler and Sealer

Model: TR-86

Equipment information: 6 Endress & Hauser flowmeters; s/s jacketed tank; full enclosure HEPA filter and positive air ready; change parts for 1mL, 1˝mL and 2mL monodose snap tip units; maximum film W 345mm; pitch 90mm to 120mm; package thickness (one side) 5mm to 12˝mm; package thickness (two sides) 10mm to 25mm; up to 21 cycles per minute; s/s construction; overall dimensions: L 3,895 x W 1,975 x H; AccuChiller (model EQ3A01) Thermal Care portable chiller 230v/1ph/60hz; VideoJet (model 3640-IP54) Laser coder, Advantage Oracle Fume Extractor, Smart Graph Marking Software; 92,156 ft. (6 pallets) of PVC/PVDC/PE (120/40/40 micron) white rolls of thermoform material 343mm web, 360mm OD, 76mm (3in.) core (purchased for $33,751); line is in good running condition, and can be cycled for your inspection; for cosmetic & pharmaceutical use

Electrical: 230v/1ph/60hz

(used/preowned/built 2003)-u83964

Bottle Filling Lines...
are Listed Below by Company Name in Alphabetical Order:
(for pictures and information please send an email to ppt@2020comm.net, or, call us at 734.528.0444):

Aesus Tincture Filling & Bottling Line:

Equipment Information: capable of approximately 1,200bph; high-speed, 30mL and other formats; rotary table 36in. (model TTF); 4-head tincture filler (model AESFILL AF4); cap tightener (model DELTA CAP 2); neck bander (model ECO SHRINK); heat tunnel 24in. (model heat tunnel IR); wrap labeler (model ECO WRAP HD); rotary collection table 36in. (model TTA); beverage shot add-on with full-sleeve shrink banding and perforator; multi-format filling capabilities and an integrated beverage shot shrink sleeve module; touch screen and button controls; commissioned in 2022 and operated for only 18 months, ideal for producers of tinctures, liquid supplements, and beverage shots seeking scalable automation with premium packaging options

Condition: (used/preowned)f4821-3

Bottling Line for Capsules and Tablets:

Equipment Information: Kaps-All bottle unscrambler (model AU 6), rated for maximum speed of 300bpm product dependent; King single head cottoner (model CF 100 RU), inverted U-cotton placement and variable speed drive, can handle up to 100 insertions per minute, product dependent; CVC Technologies 12 Lane, up to 6,000 tablets/capsules per minute; CVC Pouch Type Desiccant Inserter (model 1103), output: up to 120bpm; Loma Metal Detector (model IQ-3), unit will do speeds of 30 to 90 feet per minute; NJM-CLI 8 Spindle Capper (model Unicap150), capable of speeds up to 200bpm; Globaltek Induction Sealing Machine, (model GT-3000), able to seal 100 to 200bpm; Marburg Neck Bander (model M5), neck bands up to 100 units per minute; Axon Thermoflow Steam Heat Tunnel, unit purchased new in 2024, installed, but not used in production; Domino Inkjet Coder (model A100) 40 to 112F degrees; Inline Filling Systems 45in. s/s rotary accumulating table

Condition: (used/preowned)ae73288001

Bottling Line (NEW and Preowned Equipment)

Equipment information: NEW CPT Quicksort bottle unscrambler, capable of handling up to 1,000mL bottle at up to 120bpm; Pharmafill CS1 fully automatic cotton isnerter, inserts 2in. to 9in. lenghts at speed up to 60 to 90 per minute depending upon length; Swiftpack SV2 Twin 12 Track Channel Counter (built 2006), output of up to 12,000 pieces per minute depending on product type, size and shape; NEW Combo 120 Metal Detector and Checkweigher rated for up to 120 containers per minute; NEW CPT DualCap Automatic Capper, maximum of 150bpm cap size dependent, ideal for screw and snap caps; Aesus Eco-Wrap-Prism Pressure Sensitive wrap labeler for large containers right to left feed; Marburg M550 automatic banding machine rated for up to 100 bands per minute; 36in. accumulation table complete with s/s parts

Electrical: 120v/3ph/60hz

(used/preowned/built 2008)-ae73317001

Capmatic Bottle Filling Line

Model: Starsort unscrambler, Accurofill 6-0 volumeter filler, Alpha C5 index rotary chuck capper

Equipment information: Capmatic unscrambler (model Starsort), integrated hopper elevator, air jet bottom cleaner, Allen-Bradley controls, electrical: 220v, built 2015; Capmatic inline volumetric filler: (model Accurofill 6-0), 6 nozzles, with agitated and jacketed product hopper, bottom up filling with drip trap, Allen-Bradley controls, built 2015; Capmatic index rotary chuck capper: (model Alpha C5), with integrated retorque and reject station, cap hopper elevator, Allen-Bradley controls, built 2015; includes change parts for 50, 400, and 1,000-gram plastic bottles

(used/preowned/built 2015)-f2923-33

Capmatic Intrepid Monoblock Filler, Plugger and Capper

Model: 4A/X-PP-222

Equipment information: capable of speeds up to 60 Cpm, depending on application; Palace (model D18-SPB/HS 15) bulk bottle unscrambler with inonized air cleaner and bulk bottle elevator; Capmatic Intrepid monoblock filler plugger and capper with assorted changeparts; Allen-Bradley Panelview HMI; Allen-Bradley ControlLogix 5560M03SE PLC; Kinetix 6000 servo drives; Pharmafill (model NB1) tamper evident neck bander with Marburg shrink tunnel; Herma (model 362 ES) front and back pressure sentive labeler with Allen hot stamp date coder, top hold down, Lixis mode PVS vison system; last running oval nasal spray bottles

Electrical: 220v/3ph/60hz

(used/preowned/built 2008)-ae73317001

Complete Bottling Line for Tablets and Capsules

Model: Multiple machines

Equipment information: capable of filler 80 to 100bpm, product dependent; Speck-Tech System bottle unscrambler (model STS BSF 30) with 30in. diameter disk; Speck-Tech System Bottle Unscrambler (model STS BSF 30) with 30in. diameter disk; Pharmafill Deitz desiccant inserter (model PS1); Pharmafill Deitz cotton inserter with index cylinders (M3CS1); Eriez Inline Metal Detector (model DSP) 10x6 opening; NJM 8 Spindle Capper (model 150-S060) with cap, elevator/feeder, reject station, and change parts for 28 - 53mm cap sizes; Pillar Technologies Air Cooled Induction Sealer with sealing head for up to 120mm caps; SureKap 6 spindle cap retorquer (model SK 600); CVC Technologies Wraparound Labeler (model CVC 300 CII) with hot stamp coder; Marburg Neck Bander (model M6) with bottle indexer and (model CA600) heat tunnel; Garvey Transfer Conveyor (model 1550); Domino Ink Jet Printer (model A 100); Inline Filling Systems 45in. s/s accumulating table; line comes with all connecting conveyor (approximately 60ft.) including S-shaped, making the line U-shaped; line is still installed and is in plug-and-play condition, it will be sold whole or in part(s)

(used/preowned)-a3439

Complete Liquid Filling Line

Model: Multiple machines

Equipment information: Smartfill liquid filler; maximum speed 60bpm, product dependent, filling liquids up to 4oz.; Smartfill peristaltic pump, dual filler; chuck capper with auto feeds caps or eye droppers; conveyors; staging accumulation infeed table; wrap labeler; bottomless conveyor; thermal inkjet printer; neck bander sleever; heat shrink bunnel with pneumatic lift, CPT automatic cartorner; optional: inline metal detector and induction heat sealer

(used/preowned)-c

Cremer and NJM Solid Dose Bottling Line

Model: Bottling and packaging line

Equipment information: NJM/CLI 36in. inlet turntable, 120v/1ph/60hz/1.5 amps/ and s/s construction; Cremer TQ1220 12 lane channel sorter; 2 independent vibratory plates with 12 v-shaped channels, s/s hopper with vibratory feeder, 230v/1ph, built 1998; NJM/CLI UNICAP 150 Inline Automatic Capper: heavy duty construction, timing belt driven, s/s support frame; 4 sets of springloaded tightening discs, pneumatic torque control, Allen-Bradley PLC and HMI controls, capable of speeds up to 200cpm, product dependent, 220v/1ph/60hz/12 amps, air supply: 90psig, less than 0.5scfm without cap feeder; Enercon Super Seal 100: sealing speed 25 per minute, product dependent, 208v/1ph/60hz/10 amsp; NJM/CLI Minicolt 120-S023 compact pressure sensitive labeler: capable of outputs of to 100cpm, product dependent, bottle size 100cc, 1-7/8in. (48 mm) diameter, label length 5in. (127mm), 120v/1ph/60hz/5 amps, year built 2009; NJM/CLI 36in. Inch outlet able: s/s construction, 120v/1ph/60hz/1.5 amps; NJM/CLI curved conveyor: s/s construction, W 20ft. 6in., 120v/1ph/60hz

(used/preowned)-i220851

CVC Technologies Complete Bottling Line for Tablets and Capsules

Model: Solids packaging line

Equipment information: capable of 40 to 50bpm, product dependent; CVC bottle unscrambler with air rinse (model #1265); CVC pouch type desiccant inserter (model #1103); CVC 12 channel electronic counter (model #CVC 1220 with single lane sanitary conveyor); CVC single head cottoner (model #1117); CVC 6 spindle capper (model #1205) with elevator cap feeder and reject station; CVC wrap around labeler (model #300C4), labeler has upgraded touch screen controls, Markem Smart Date Printer with vision system and reject stations; Enercon air-cooled induction sealer (model Superseal 100); CVC 900mm accumulating table; approximately 100ft of s/s raised bed variable speed conveyor; purchased in the mid 2000's and is still installed and working

(used/preowned)-a3604

CVC Solid Dosage Packaging Line

Model: Solids packaging line

Equipment information: Kalish bottle blower, 240v/1hp/60hz/2 amps/˝hp, built 2000/2007; CVC capsule counter CVC-1220, 230v/50-60hz/710va+NPhbar5; CVC cottoner CVC1117, 220v/60hz/965W; CVC capperCVC1205 MNF, 220v/1ph/220W; Enercon Induction Sealer, 238v/1ph/50-60hz/17.5 amps; PDC International Steam Tunnel, 240v/3ph/10 amps/1hp; Parker Steam Boiler 9˝hp; PDC International Label Machine, #50-ERL; Turn Table #1 Panasonic Series Speed Control, #10201049; Turn Table #2 Minarik Corp. Motor Master 20000 Series #MM23101C; Air Knife Weg W22 NEMA Premium, 230v/34.4 amps/17.2rpm/3hp/43/21.5 NEMA, Eff 91.0% Code G Des B Amb 40cEnclTEFCIP55, Usable At 208v/50hz/15hp/380v/20.7 A 2910 RPMSF1.0 Frame 254Tc SF1.25; Hitachi Ink Jet Printer Model RX2-SD160W 100-120v/200/240V Phase 1 Cycles 50-60HzInput 1.2amps

(used/preowned)-i240503

Glass Bottle Filling, Capping and Terminal Sterilization Line for LVPs

Model: Various Companies

Equipment information: filler/capper output 1,100 to 1,500bph, size dependent; format parts included for 100mL, 250Ml, and 500mL glass bottles; DF (model LF-GV 800) 6 bottle washer, built 2020, complies with good manufacturing standards (GMP) and FDA directives; MEA pharma linear filling & and rubber stoppering machine, built 2018, under LAF with in-out conveyor belts, 4-up filling system, fill accuracy: ą 1.5 % at 500mL; DF (model GC/4T-R) capper, built 2020, continuous movement model with 4 capping heads by rolls; autoclave sterilization trolleys - 10 trolleys in s/s 316 complete with movable trays, 10 under trolleys s/s 304 with wheels; Fedegari (model FOW6/C) autoclave, built 2018, superheated water sterilization autoclave, 2 trolleys double door interlocked, capacity: 5m3, 100mL = 6,412 bottles/cycle, 250mL = 2,620 bottles/cycle, 500mL = 1,976 bottles/cycle; DF (model SSA/5 ETA1000) visual inspection and semi-automatic labeling, built 2020, checks the vials contents magnified by a video-camera, with selective manual discard, and then applies the label with variable data print; line configured as follows: washing/filling/stoppering/capping/terminal sterilization/visual inspection/semi-automatic labeling; removed from production July 2024

Electrical: European voltage

(used/preowned)-hs1822-01

Hefestus Bottling Line

Model: unknown

Equipment information: 20 to 30bpm; NEW England Bulk Bottle Unscrambler; rotating feed table; dual index machine 4 head piston filler for partial fills each station; dual head capper with sorter and chuck tightener for nozzle top dispensing caps; rotating collection disc; single station trunnion style wraparound pressure sensitive labeler; size containers: 500mL HDPE cylinder, 500mL HDPE Boston Round, 250mL HDPE cylinder, 500mL PET Boston Round, 250mL PET Boston Round, 1,000mL HDPE cylinder; Siemens Simatic touch screen HMI; E-Stop button; last used on alcohol based hand sanitizer and isopropyl alcohol

(used/preowned)-ae72511001

IMA Swiftpack Solid Dose Bottle Line

Model: unknown

Equipment information: Kaps-All (model AU-6C) automatic bottle unscrambler with ionized air cleaner; Thermo Ramsey (model Versa RX) checkweigher for empty bottles; IMA (model B12) electronic track counter; Themor Ramsey (model Versa RX) checkweigher with reject; Pharmafill (model CS-2) twin head cottoner with pin indexing; Bellatrx (model SCC) chuck capper with cap elevator and sorter (changeparts for 33mm and 38mm caps); Enercon Compak 3200 water cooled induction sealer; Filamatic (model CAL-2-CT) cap retorquer into an Arrowhead 36in. accumulation table; all interconnecting conveyors are included

(used/preowned)-ae73288001

KHS Glass Micro DPG Bottling Line

Model: Innofill

Equipment information: capable of speeds up to 160cpm or 20,000bph; bottle size range: 40mm to 125mm D x 120mm - 360mm H; bottle fill volume: 0.2L - 1˝L, 24-head rotary filler, rinser and crowner; designed for glass bottle; also setup for CIP and includes CIP system

(used/preowned)-ae70342028

Multipack Formatrice Packaging Line

Model: FRT700

Equipment information: maximum speed 150 cartons per minute, or trays up to 25 trays per minute, product dependent; collating and wrapping packaging line; 6 lane collator; try erector; shrink wrap dispenser; heat tunnel with Siemens Simatic Touch Panel screen controls; Nordson hot melt glue applicator; best suited for tunning bottles size range: D 40 to 50mm to 90mm maximum x H up to 200mm; round oval, square rectangular; also capable of running carton, self-standing stable cartons, size range: sides 50mm to 90mm x H up to 200mm; example, i.e., carton with a bottle inside like mouthwash

(used/preowned)-c3173

Multivac Tray Filling, Sealing and Packing Line

Model: G700

Equipment information: complete line; rated at 18 cycles per minute, depending on product size and application; tray sealer, roll stock or die cut; 1 cleated incline conveyor with sanitary belt, vibratory transfer conveyor; 1 Yamato Omega (ADW-O-0620S) combination scale with dimpled buckets, mezzanine; 1 tray de-nester, associated conveyor; 1 Multivac G700 tray packer and sealer; 1 Multivac combination metal detector and checkweigher; Allen-Bradley controls; last running clam shell containers

Electrical: 220v/3ph/60hz/1kw

(used/preowned/built 2022)-ae73317001

Pharma Packaging System

Equipment information: capable of speeds up to 200bpm, product dependent; 36 lane capsule and tablet bottling line; automated bottling line designed for pharmaceutical and nutraceutical solid-dose packaging; includes bottle elevator; M1200 unscrambler; 36 lane SC360 electronic counter; conveyors; 48in. accumulation table; capable of speeds up to 200bpm, product dependent 36-lane electronic counting system infrared sensors scanning at 34,000 scans per second for high-accuracy counting, handles tablets, hard capsules, and transparent softgels; automatic bottle feeding, orienting, counting, and conveying design for continuous commercial production; Pharma Packaging Systems elevator (model PharmaLift s/n PPS 1458, manufactured 2023), 110v/1ph; Pharma Packaging Systems bottle unscrambler (model M1200, nscrambler s/n PPS 1455 manufactured 2023) 208v; Pharma Packaging Systems capsule and tablet counter 36 Lanes (model SC360, s/n PPS1456 manufactured 2023) 208v; 48in. accumulation table; 100in. x 3.5in. conveyor, 91in. x 3.5in. conveyor, 175in. x 3.5in. conveyor

Electrical: 110v/1ph/60hz

(used/preowned/built 2023)-chMJK2570

Pharma Packaging System

Model: 8-1 VitaCount

Equipment information: accumulation feed table; s/s construction; Pharma Packaging Systems lane counter (model 8-1 Vitacount); 8 lane; s/s product contact surfaces; single filling station with reject; HMI touch screen; accumlation discharge table s/s construction; Domino A420i coder (serial# AST00117225); Enercon induction sealer (model Super Seal)

Electrical: 230v/50hz

(used/preowned/built 2013)-f2660-28

Pharmafill Automatic Tablet and Capsule Filling Line

Model: TC3

Equipment information: Pharmafill (model TTA36T) 36in. diameter s/s accumulating table; DC speed controls; Pharmafill (model TC3) tablet counters mounted over a 10ft. L x 10in. W 2 lane conveyor; electronic counters; large capacity hopper; vibratory feeder; touchscreen HMI; no change parts; on casters for portability; maximum tablet/capsule width or diameter: 22mm, maximum tablet/capsule length: 22mm, maximum tablet/capsule height: 10mm; rate of speed for 6mm tablet: 2,500tpm; rate of speed for 00 capsule: 1,250cpm; maximum bottle height: 10in.

Electrical: 110v/1ph/50-60hz

(used/preowned)-u85031

Sidel Combi Sensofill Triblock Filling Line

Model: Combi Sensofill 40/24/12 ESL

Equipment information: capable of speeds from 120 to 300bpm; fill range from 5oz. to 80oz. (with proper changeparts); can be upgraded to aseptic filling; Cap: 38mm screw cap (BERICAP SK38/15 2T SFB 1.2mm E-Wall ACF (3510)), includes mold and filler changeparts for 8oz., 12oz., 16oz., 32oz. and 50.7oz. bottles; line consists of AF-USA Hih air compressor (model CE46A); preform hopper elevator and unscrambler; ionization nad aspiration systems; preform decontamination, Sidel (model SBo-10) stretch blow molder; Fords capping press and conveying system for foil caps; capper chucks and feed hopper; Hueft full container xray with reject system; Hartness Dynac 6400 vertical accumulation; Fuji (model 4200-DE) sleever with ST-6 steam tunnel; Arol (model 11631) chuck capper; Baumer Universal combined caser (model 551)

(used/preowned)-ae73022001

Simplex Single Head Piston Filling Line

Model: F

Equipment information: bottle filling; s/s product contact surfaces; product hopper; chain bel conveyor with lid applicator and pressure roll closure; 48in. accumulation table (serial# 4383)

(used/preowned)-f4531-2

Spee-Dee Packaging Machinery Rotary Turret Filling System

Model: RT0167

Equipment information: 12pocket rotary auger filler with 36in. base, 3,700S twin auger head filler with integrated check weigher; SKA fabricating bottle depalletizer, (model full-height automatic depalletizer), Horizon Powder Systems; Arrowhead Bottle conveyor and lowerator, gripper rinser lowers bottles from the depalletizer to the line, (model: GR200-AD-S-RH-3.75-V0300-H0600-0185-0785); New England bulk bottle unscrambler with ionized air cleaner, (model: NEHCPCL-48); New England 6-head rotary chuck capper with cap sorter and feeder (model NERCC-6), includes change parts for 33mm, 38mm, 45mm, 53mm, 63mm, 89mm, 110mm, and 120mm caps; PE Modular SL redundant head pressure-sensitive rotary labeler, includes Videojet thermal transfer printer and PE camera system for label presence and date code, (model Mod Plus 540-6-M-4P-0-1-0-0-0); Polypack Shrink Bundler (model Pharma-32D); Douglas Machine Trivex RL case packer, integrated Diagraph print and apply case labeler; powder transfer system designed for opening supersacks and feeding the filler at a rate of 6,000lbs. per hour

(used/preowned)-chMJK2057

Case Packaging Lines...
are Listed Below by Company Name in Alphabetical Order:
(for pictures and information please send an email to ppt@2020comm.net, or, call us at 734.528.0444):

Lantech C-1000 Case Packing Line:

Equipment Information: rated at 10cpm; Lantech C-1000-T case erector; WestRock RCL 60 with Kuka RCL 60 robot loading system; Lantech CS-1000 case sealer; Logopack 300 Printer,currently crated; case erector range: 200mm-500mm L x 150mm-325mm W x 150mm-520mm H (open); case sealer range: 200mm-650mm L x 150mm-510mm W x 120mm-500mm H (closed) Rated at 10 cases/minute

Condition: (used/preowned/built 2020)ae73296001

Filling Lines...
are Listed Below by Company Name in Alphabetical Order:
(for pictures and information please send an email to ppt@2020comm.net, or, call us at 734.528.0444):

Capmatic Monoblock Filler, Plugger and Capper:

Model: Bambino

Equipment Information: s/s construction; swingarm Allen-Bradley PanelView Plus 600 push button controls with viewing screen; stack light; E-stop button; on casters for portability, accumulation table

Electrical: 230v/60hz

(used/preowned)-4158-6

Complete 2022 Inline Filling Systems 4 Head Piston Filling Line:

Equipment Information: 54in. diameter feed table; Inline Filling Systems 4 head piston filler (model FPD 4-12) with with 32oz. pistons; 12ft. long s/s indexing conveyor; s/s product tank and reciprocal product pump; Inline Filling Systems capper with waterfall style elevator/cap sorter and 10ft. long s/s conveyor; Inline Filling Systems wrap labeler; 2-gap transport conveyors; Videojet (model 158) 2023 inkjet coder; Inline Filling Systems 54in. diameter accumulation table

Condition: (used/preowned/built 2022)a3614

Form/Fill/Seal Lines...
are Listed Below by Company Name in Alphabetical Order:
(for pictures and information please send an email to ppt@2020comm.net, or, call us at 734.528.0444):

ACS Pouch Form/Fill/Seal Horizontal Machine

Model: QuickPouch Horizontal

Equipment information: capable of rates up to 48 cycles per minute, product dependent; VideoJet P3400 thermal label printer applicator; recipe storage; Allen-Bradley PLC; dual webs for multiple materials; interlocked safety enclosure; pouch sizes 1in. to 6in. W x 1in. to 9in. L; air requirement: 100psi; overall dimensions: 40in. W x 50in. T x 35in. D; weight: 350lbs.

Electrical: 220v/1ph/60hz

(used/preowned)-cE4334

Bossar Liquid Pouch Horizontal Form/Fill/Seal Machine

Model: BL-3000/STU

Equipment information: capable of speeds up to 150ppm, product dependent; liquid stand-up pouches with time pressure liquid filler; setup currently for 140mm x 140mm x 42+42mm stu to maximum 230mm x 350mm flat pouch @ speeds of 80 to 100 ppm(per OEM); Allen-Bradley PLC 5550 Compact Logix PLC and servos ultra 5000 in devicenet; Allen-Bradley Panelview 1250 HMI; form and fill horizontal pouch (model BL-3000/STU 3); all s/s contact parts, top datum line for quick size changes; film unwind: maximum D 900mm x W 850mm; photo eye registration; no pouch no fill system; film edge alignment; central lubrication system; 3 magnetic flow meters with heated and jacketed hopper temperature probe and agitation; 3 filling nozzles; Triplex punch die cut unit; Triplex embosse date coder; last running a 3oz. (88.7mL) hot fill at 80°C in a stand up pouch, with shape in top seal at 150ppm; pouch was W 86mm x 171mm x 47mm bottom gusset; manuals included; overall dimensions: H 112in. x L 33ft. x W 171in. with control cabinet; last ran aloe vera drink with pulp

Electrical: 480v/3ph/60hz

(used/preowned/built 2009)-ae71898002

Bossar Powder Sachet Horizontal Form/Fill/Seal Packaging Line

Model: B3200/4

Equipment information: capable of outputs of up to 360 pouches per minute, product dependent; 4 sided seal; maximum product volume up to 1.7oz.; pouch size range: minimum 2.4in. to 3.15in. x maximum 3.15in. x 5.12in.; currently set a 12.5 gram sachets (0.44oz.); 4 servo aurger dosing units; vertical powder auger feeder to dosing units; Ishida Dacs checkweigher; Boss IM-1400 Compact Horizontal Cartoner; intermittent motion; carton size range: minimum L 1.18in. x W .78in. x H 3.34in., maximum L 5˝in. x W 7in. x H 6.3in.; hot melt glue unit; capable output of up to 60 cartons per minute, product dependent; Hugo Beck Sammelpacker Shrink Wrapper and Heat Tunnel, set to shrink wrap 6 cartons per wrap; all interconnecting conveyors for line included

(used/preowned)-sD6326

Lenis Machines Vertical Form Fill and Seal Pouch Packaging Line

Model: LMVEP-320-4S

Equipment information: 4-side/3-side sealed sachet packing machine; film alignment; VideoJet 6530 printer; 10 head weigher (LMSWGH-10S) for granular products; Z-bucket elevator (LMZBE-T1) Zbucket elevator; delivery conveyor (LMODC-350D1) output or delivery conveyor; rotary table (LMRTBL-1000) rotary bag collection table; 80 gallon vertical tank air compressor; overall dimensions: 45.59in. x 36.61in. x 47.76in.; approximate weight: 771.61lbs.

Electrical: 200v/3ph/7.5hp

(used/preowned/built 2022)-e989806

M&O Perry Form/Fill Liquid/Powder Auto Filler

Model: CU-1013

Equipment information: housed in a vertical laminar flow system with 2 Clean Room International Sam 24 MS 310 Laminar Flow HEPA Filters; construction: frame 304 s/s, tabletop 7/8in. thick 316 s/s, side panels 316 s/s; PLC Allen-Bradley SLC5/05; interface Proface 10.4in. color touchscreen; currently configured for liquid or powder, 10mL vials 1.969in., 20mL vials 2.284in. or 100ml vials 3.719 with 20mm stoppers; speed 20 to 40 vials per minute, 4 simultaneously, product dependent; manuals included; E-stop button; spare parts: conveyor blets, filters (different types), seals (different types), electrical wires and connections, etc.

Electrical: 208v/1ph/60hz/40 amps

(used/preowned)-ss264700

Plan It Packaging Full Vertical Form/Fill/Seal Line

Model: VFFS

Equipment information: output up to 100 packages per minute; product dependent; 14 head CCW scale: dimpled buckets, timing hopper; intermittement motion; bag W up to 12in.; incline conveyor; outfeed conveyor; heavy duty s/s conveyor; all s/s contruction

(used/preowned)-sE10967

Taylor Products Form/Fill/Seal Unit

Model: V1200

Equipment information: fill size from .5# to 5# capacity; packaging size range from 2in. x 2in. to 8in. x 14in.; Domino Touch Panel V230i coder; PLC controls; includes 5 forming tubes; on casters for portability; E-stop button; electrical: 240v/3ph/30 amps

(used/preowned/built 2010)-f4812-1

Technopack Vertical Form/Fill/Seal Bagging Line

Model: Mini Doypack

Equipment information: 10 head buck scale consisting of the following: -Z style bucket elevator, stainless steel enclosure, plastic buckets; 10 head radial head bucket scale; s/s buckets and chutes; designed to fill pre-formed vertical stand up zipper bags; s/s frame; operator touch screen; s/s frame work for bucket scale; stack light; manuals included; E-Stop button

(used/preowned)-f4387-1

Gummy Lines...
are Listed Below by Company Name in Alphabetical Order:
(for pictures and information please send an email to ppt@2020comm.net, or, call us at 734.528.0444):

Automatic Gummy Depositing Line (NEW)

Model: GD50Q

Equipment information: production capacity (kg/h) 50 to 80; advanced and continuous for making different sizes of gelatin; rated depositing times (n/min) 25~55; electric power needed 5kw/220v; refrigerator MT120/15,000 kcal/h; compressed air consumption 0.20m/min.; compressed air pressure 0.4-0.6Mpa; conditions needed for the drying system; room temperature(°C) 25-35, humidity 45-50%; L of line 5m: gross weight approximately 2,000kg; FLOW CHART: sugar/water/pectin dissolving - mixing - storage - transporting - depositing - cooling - demolding - following disposal - packaging; 1 fixed jacket cooker (304s/s) 100L; 1 gear pump for transfer of syrup; 1 color and flavor static mixer addable for more color; 1 storage tank (304s/s)100L; 1 gummy/jelly depositing unit 50kg to 80kg per hour; 1 depositing head (servo motor control), oil sprayer, cleaning system; 2 brushes and an electric cabinet; 1 set of moulds, Teflon coated, 160 pieces; 1 cooling tunnel (5p USA Compland refrigerator); approximate 12 week delivery time

(NEW)-b211139S

Automatic Gummy Production System (NEW)

Model: M40

Equipment information: capable of depositing up to 15,000 gummies per hour (ultimate output per hour depends on factors like tank size, cleaning time, depositor speed, etc.); available in single kitchen "batch" or dual kitchen "semi-continuous" formats; room temperature (°C) for cooling system 22 to 25; humidity (%) for cooling system 45; overall dimensions: L 590mm x W 400mm x H 450mm

Electrical: 220v/1ph/60hz

(NEW)-c

Gummy Production Equipment (NEW)

Model: M150

Equipment information: with depositor, capable of speeds up to 60,000 gummies per hour (ultimate output per hour depends on several factors like tank size, cleaning time and depositor speed, ideal for small to medium production runs); stand-alone system capable of either "batch" or "semi-continuous" production duties; can produce gummies in one or two colors; hard candy can also be produced with this system; chiller 10hp; room temperature (°C) for cooling system 10 to 25; humidity (%) for cooling system 55; compressed air consumption 1.2mł/min.; compressed air pressure 0.4 to 0.6Mpa; L of line 68.6ft.; gross weight approximately 7,500kg

Electrical: 220v/3ph/60hz

(NEW)-c

Gummy Production Equipment (NEW)

Model: M300

Equipment information: capable of speeds up to 120,000 gummies per hour (ultimate output per hour depends on several factors like tank size, cleaning time and depositor speed, ideal for medium production runs); stand-alone system capable of either "batch" or "semi-continuous" production duties; can produce gummies in one or two colors; automatic trya washing system: high pressure pump sens the customer's hot water to multiple spray nozzles, blower removes excess water after the washing process; all s/s construction; variable speed of 80 to 120 trays per hour; chiller 15hp; room temperature (°C) for cooling system 22 to 25; humidity (%) for cooling system 55; compressed air consumption 1.2mł/min.; compressed air pressure 0.4 to 0.6Mpa; L of line 61ft.; weight approximately 15,000kg

(NEW)-c

Gummy Production System (NEW)

Model: GT300

Equipment information: production capacity 50 to 80kg/h; mini-CFA makes continuous depositing possible without the use of a complex continuous cooker; continuous depositing with 30% less operators compared to a traditional continuous gummy line; 50% increased gummy output compared to a batch-based cooking system; color, flavor, acid and actives (powder or liquid) added automatically by weight into pre-weighed batches with +/- 5g accuracy; in-tank Brix Meters replace tedious manual measurements and improve cook consistency; integrated load cells for automatic syrup and water additions to pre-designated recipe weights; room temperature (°C) 22 to 25; humidity (%) for cooling system 35 to 40; chiller 5hp; compressed air consumption 0.5mł/min.; compressed air pressure 0.4 to 0.6Mpa; L of line 40ft.; gross weight approximately 4,000kg

Electrical: 220v/3ph/60hz

(NEW)-c

WeighPack Gummy Packaging Line

Model: for Premade Pouches

Equipment information: capable of up to 25 to 30 cycles per minute, product dependent; Swifty 3600 automatic bagger; Swifty Smart conveyor; Swifty weight check (10-4000); Batchmaster IV counter; Tax Stamp labeler; 2 auxiliary inspectors; product measuements: 1in. x 1in. gummy 4.5g, 5 pack total pouch weight 22.5g, 4 pack total weight 18g; laminated pre-made pouch with CR resealable closure; pouches to have zippers pre-opened prior to loading into SWIFTY 3600; package measurements with weight: 3.86in. W x 5.86in. L; gummies must freely dispense into the pouch leaving 25% head space and 75% product space; bowl feeder; counter/smart infeed 2 continuous product counting and filling system; 10.4in. color touchscreen with extended cable for column mount at floor level; 100mm dual view scanner; 5 gate continuous feed part processing unit with see through inspection; tool-less assembly; disassembly and grooved stepper motor driven gates; 24in. rigidized s/s enhanced geometry bowl with high speed feeder; 3in. tool-less adjustable product feed gate; ultrasonic bowl lever sensor with adjustable mount to be tied into WeighPack feed; conical bowl dissipater for gentle and efficient product flow; rigid s/s product transfer chute to packaging machine; BSI Batchmaster series interface communication cable to Swifty bagger; no air; electrical: 120v/1ph/60hz/15 amps; incline smart converyor: two will pockets, polyurethane belting for low profile systems s/s frame includes casters; auxiliary inspection: Lock/Loma V5 wafer thin metal detector, includes collating funnel and mounting bracket; Swifty Bagger 3600: for premade laminated bags, conveyorized bag feed, robust frame with heavy duty cam drive, bag shaking device at filling station, straigh line design with left to right configuration, W 3.5in. to 8in. pouches (90mm to 200mm) x L 3.5in. to 11in. pouches (90mm to 280mm); Tax Adhesive Tax Stamp labeler: side label flat face label, outside D of reel 300mm maximum flat, inside D of 38mm, plastic chain conveyor, s/s and aluminum frame, AC motor with reduction, adjustable lateral guides, twin belt space to create container

Electrical: 120v/1ph/60hz

(used/preowned/built 2022)-e1058415

SaintyCo Automatic Gummy Production Line

Model: G80

Equipment information: rated at speeds up to 500 gummies per minute, depending on size and application; can run up to 2 colors simultaneously and is designed for starchless operation on gelatin and pectin gummies; touch screen HMI; s/s construction; push button controls

Electrical: 400v/3ph/60hz

(used/preowned/built 2022)-ae73209001

Inspection Lines...
are Listed Below by Company Name in Alphabetical Order:
(for pictures and information please send an email to ppt@2020comm.net, or, call us at 734.528.0444):

Dabrico Vial Inspection Line

Model: DI-100

Equipment information: s/s construction; magnifier inspection; push button controls

(used/preowned)-f2792-82

Eisai Inspection Machine

Model: AIM 1088W

Equipment information: rotary 32 station; reject circular accumulation table; 2 Ineva Liftronic Universale articulated lifter (model 2ALTF), 20kg capacity, with handlebar controls at lift point, column mounted, with column (serial#s 8196F and 8290F) both units built 2006; Eisai AIM 1088W push button controls; E-Stop

(used/preowned/built 1993)-f2923-24

ThermoFisher Scientifc X Ray Metal Detector

Model: DYXIM S

Equipment information: maximum inspection speed up to 100 per minute; aperture approximate W 5˝in. x L 26˝in. x H 17˝in.; detectable foreign bodies: glass 2mm, metal 0.15mm, stone 2mm, bone 3mm, PVC and types of plastic 3mm; GP Tecno HMI; Haskris (model R033) chiller; stack light; E-Stop button; does not have conveyor chain, last used as pass through in conveyor line

Electrical: 230v/50-60hz/28 amps

(used/preowned/built 2010)-ae70970387

Liquid Filling Lines...
are Listed Below by Company Name in Alphabetical Order:
(for pictures and information please send an email to ppt@2020comm.net, or, call us at 734.528.0444):

Acasi Pressure/Gravity Overflow Liquid Filler

Model: GI3300

Equipment information: 16 heads; constructed of 304 s/s, all contact parts are s/s; 20 gallon s/s overflow tank; up to 20 hose s/s feeding manifold (currently set up for 16 heads with hoses) calibrated guide for quick changeover; PLC with touch screen controls; pump with 316 s/s check valve mounted on it; timing screw for infeed of bottles; machine mounted over existing conveyor; machine portable on casters

(used/preowned)-a3565

Acasi Filling Line (complete)

Model: Complete Line

Equipment information: 42in. turntable unscrambler; Acasi 16 head pressure gravity filler with screw indexing; Acasi 6 quill capper with double belt grippers; cap elevator; packleader neckbander with indexing and heat tunnel; front and back labeler with indexing pads, aligning chains and integrated hold down; 42in. D rotary accumulating table; (also available Sidel Preform blow molder that fed this line)

(used/preowned)-se33866

Acasi Inline Piston Filler

Model: T-PIS-8

Equipment information: SureKap (model SK6000-BF-58) quill capper; liquid and paste; CVC (model 302C wrap labeler); 48in. disc unscrambler; 48in. disc accumulator, 7˝in. x 10ft. L conveyor; GlobalTek bottomless conveyor gap transfer hugger belt conveyor; filler has 2 sets of pistons for up to 50oz. fill, žin. D adjustable center nozzles and operator interface and PLC, 220v/1ph/60hz; capper has 6 quills capable up to 100mm, adjustable cap chute and pick off, left to right direction, 115v/1ph/60hz; labeler capable up to 6˝in. H label, 220v/1ph/60hz

(used/preowned)-ae73102008

Accutek Bottle Liquid Filling Line

Model: AVF 10

Equipment information: line speeds of up to 100 bottles per minute, product dependent; 42in. D feed table (p/n 28-042-USA); inline piston filler (model AVF10 series 16); 10 head, with pistons, and product hopper, with integrated slat conveyor (p/n 02-551-000); inline spindle capper (model ASC-6) with cap sorter and cap elevator (p/n 22-500-00); 15in. Accutransfer turntable, Labelette dual sided labeler with Dikai coder (p/n 24-APS-228); 42in. Accutek discharge table (p/n 26-ST45-SAO) with integrated slat conveyor and descrete machine HMI controllers; manuals included; air requirement: 40psi; E-Stop button

Electrical: 110v/40hz/16 amps

(used/preowned/built 2021)-f3902-1

Adtech Syringe Filler

Model: unknown

Equipment information: aseptic fill and finish; visual inspection system; capper feeder; Allen-Bradley PLC and interface

(used/preowned/built 1989)-f241-37

Aesus Tincture Filling & Bottling Line:

Condition: (used/preowned)f4821-3

Aesus (DL Tech) Liquid Filling Line

Model: unknown

Equipment information: 6 heads; filling range: 200mL to 1 gallon; bottle in-feed turn table; capper; conveyor L 12ft.; inkjet coder; Aesus wraparound bottle labeler; bottle accumulation turn table; air required; in good operational condition

Electrical: 110-220v

(used/preowned)-b211203

Bausch Advanced Technology Group Vial Filling Line (NEW/unused)

Model: Bausch

Equipment information: BAUSCH type 721 manual debagging-lidding station (including outer debagging); Bausch type 411 UV light tunnel to decontaminate outer surfaces; Bausch type 534 filling and stoppering machine (including pre-gazing); maximum of 150 containers per minute (9,000 per hour) for 2R vials, and 110 containers per minute (6,600 per hour) for 6R vials; Bausch type 551 crimping machine; Bausch type 309 outside washing machine; Bausch Type 603 labeling machine with dual tray discharge; Containment System Isolator (oRABS); includes change parts for vials: 2mL injection vial 2R-16mm outer D x 35mm H, 6mL injection vial 6R-22mm outer D x 40mm H, 10mL injection vial 10R-24mm outer D x 45mm H, 10mL injection vial 10R-24mm outer D x 45mm H, 30mL injection vial 30R-30mm outer D x 75mm H

(NEW/unused)-f4668-1

Bausch & Strobel Ampoules Filling Line

Model: unknown

Equipment information: rated up to 4,000 ampoules per hour, producet dependent; (model FAW1000) washer designed to handle 35mm maximum D x 140mm maximum H ampoules; 1 (model C intermittent motion rotary ampoule filler), s/s contact surface, designed to handle ampoules and presently set up for 20mL ampoules at 3, 000 per hour; Busach & Strobel tocuh and button controls; E-Stop button

Electrical: 480v

(used/preowned/built 1994)-d1977

BellatRx Double Pitch Vial Filling, Capping and Labeling Monobloc Filling Line

Model: BD-250

Equipment information: tooled for 10mL vials; vial hopper; vial bowl; vial call sensor; vial low sensor; cap bowl; starwheel; filling station; cap station; tap station; vial chute track; conveyor; reject station; HMI screen; vision sensor; cap chute track; cap call sensor; cap low sensor; cap starwheel; cap presence sensor; high cap sensor; wrap belt; inspection sensor; reject confirmation sensor; Herma applicator; web printer; peel plate; air requirements: 90psi

Electrical: 220v/3ph/100 amps

(never used/built 2015)-d4382

Capmatic Inline Vial FIlling Line

Model: Conquest FS8

Equipment information: 16 head walking beam filling station with 8 piston fill pumps; integrated chain conveyor; rotary stopper feed system with vibrating bowl feeder; Allen-Bradly Panelview 1000 HMI (serial# CQ1110919); 36in. accumulation table; (model RoadRunner) Pharma Capmatic crimp capper, 12 station with Capmatic cap elevator; Allen-Bradley PLC controls and Panelveiw 900 HMI; Capmatic dual position tray loader; stack lights, E-Stop button

Electrical: 208v/3ph/60hz/20 amps

(used/preowned/built 2002)-f3472-1

Capmatic Monoblock Filler Dropper, Plugger and Labeler

Model: Bambina FPCL

Equipment information: capable of speeds up to 40cpm, product dependent; includes rotary turntable infeed; liquid filler; tincture/dropper plug inserter with vibratory bowl feeder,; screw capper with vibratory bowl feed; pressure sensitive wraparound labeler; manuals included; last used in pharmaceutical operation on creams and lotions

(used/preowned)-ae73256002

CDA Filling Line

Model: E-Fill

Equipment information: labeling and filling line; consisting of filler; screw capper; labeler; accumulation table; conveyor; only used for trial runs; Leister hot air blower; E-Stop button; ideal for liquid vials, bottles, essential oils, etc.

Electrical: 208-250v/1ph/60hz/16 amps

(used/preowned/built 2021)-f3948-1

CLI Inc. Bottle Filling and Capping Line

Model: UF-100

Equipment information: 12 head filling line; s/s product feed holding tank and level float; bottle filling timer and spacer; variable speed filling and capping line conveyor; variable speed vibrating feeder; bottle capper and hopper; capper height adjustment conveyor; air requirements: 90psi, 5scfm; previously used in pharmaceutical application

Electrical: 110v/1ph/10 amps

(used/preowned)-sE13584

Complete Liquid Filling Line

Equipment information: capable of 80-100bpm, product dependent; ACASI 16 head inline filler (model: GI 3300); ACASI spindle Ccapper (model: Trucap-6-VERT); Pack Leader tamper evident sleever with tunnel; CVC front and back pressure sensitive labeler (model: 400C); 60in. accumulation table; all conveyor; case erector; Little David case taper (top head); removed from service January 2025; available with Sidel Blow Molder for PET bottles, 2-up compact unit set to do preformed bottles at 40 per minute; blow molder sold at extra cost

(used/preowned)-a3574

Cozzoli Ophthalmic Monoblock Filling Line

Model: RFPCquad

Equipment information: capable of speeds up to 180bpm, product dependent; fills 5mL, 10mL and 15mL bottles; intermittent motion monoblock rotary filler; plugger; capper; torquer; 4 head filling station; vibrating bowl feeders for plugs and caps, 12.4mm and 19mm plugs, 20mm caps; with (model VU36) bottle unscrambler feeder; bottle elevator (model AT42); 42in. discharge accumulation table; comes with unused (model S250) labeler; built 2020, FAT performed end of 2020, unit installed 2022

(used/preowned/built 2020)-f4515-1

DTM High Speed Liquid Filling Line

Model: Purefill 2000

Equipment information: FILLER: speeds up to 200bpm with proper configuration; 6 nozzle flow meter filler; sanitary design; continuous motion (walking beam) servo driven; bottom-up fill capability for foamy or high viscosity products; flush in place system included with each machine; quick to changeover; highly flexible for a wide range of products and container sizes; last filling CBD oil in 1oz. Boston Round Bottles at 200+bpm; Electrical 480 volts 3 phase 50/60 Hz. S/N 2610. overall dimensions without conveyor approximately: L 88in. X W 44in. X H 97in.; CAPPER: 1 used DTM Packaging 8 head high speed rotary capper for capping vials and bottles with dropper caps; Hoppmann Centrifugal Feeder (model FT/40RD); capable of running 200bpm+, comes with four sets of bottle handling change parts for ˝oz., 2 sets of 1oz. and 2oz. glass Boston Round bottles, running approximately 22mm glass dropper cap; Hoppmann feeder approximately 55in. x 55in. x 81in. H; complete with s/s cap elevator with padded hopper, elevator has 12in. W cleated belt, cleats spaced 12in. apart and are 3in. H, overall H 9ft., discharge height 94in., hopper dimensions 42in. x 38in. x 31in. deep; overall dimensions capper without conveyor approximately: L 58in. x W 58in. x H 8ft.3in.

Electrical: FILLER: 480v/3ph/50-60hz, CAPPER: 460v/3ph/50-60hz.

(used/preowned)-d4581

Elmar Monoblock Filler and Capper

Model: RPE-736/16 RH

Equipment information: 36 station Elmar Filler Turret and Fowler Zalkin 16 head "pick and place" capping turret complete with infeed timing screw; infeed starwheel; intermediate transfer starwheel and discharge starwheel mounted on a monoblock main base; 3žin. D super extended cylinders, maximum fill range 67oz.; 3žin. D s/s "dome style" pistons with PTFE wear rings and "0" ring; motorized volume adjustment; adjustable container rails with replaceable UHMW wear surface; quick change feed screw, tool less; change parts, tool less; powered bowl height adjustment: 3-15/16in. to 9-15/16in., for instant height changeover; central lubrication cluster, Lincoln Automatic Lubrication System, manual pump; complete electronic control system with Allen-Bradley 5/05 PLC, operator station with Allen-Bradley Inverter Drive System; filler control system is a PLC based control system; basic unit controls filler speed, fill volume and no container/no filler trip mechanism; FOWLER/ZALKIN 16 head "pick and place" capping turret (PCD 498mm) to mount on a Elmar filler monoblock; turret is equipped for the application of 63mm, screw-on closures to PET bottles at a rate of applied closures per minute; machine is equipped with: 16 Zalkin BH-3 Hysteresis magnetic clutch heads for screw-on closures requiring an application torque of 12 to 36in. lbs. +-10%; heads are equipped for use with quick change chucks for cap handling and application

Electrical: 480v/3ph/60hz

(used/preowned/built 2007)-se33650

Filamatic Cubitainer Filling System

Model: E-Fill

Equipment information: rated up to 10 containers per minute; bag in a box liquid filling system; s/s product contact surfaces; twin head filler with MicroMotion flow meters; neck positioning clamps; chain conveyor; twin head single chuck capper station with bowl cap feeder; Cubitainer handling feed system; previously filling 20L cubitainers; Allen-Bradley PanelView Plus 600 controls; E-Stop button

(used/preowned/2 machines available, both built 2007)-f2937-9, f2937-10

Filamatic Liquid Bottle Filling Line

Model: UNI-500

Equipment information: speeds up to 60 units per minute, product dependent; 4 head inline piston filler over conveyor design; NJM Beltorque capper (model BT-IC) with cap hopper elevator; Loma checkweigher (model CW3-400UL) with air reject (serial# GCW38577-56450F) built 2015; Charles Lapierre wraparound labeler (model UNI-500), with Videojet Dataflex 6530 coder, Lapierre (serial# 489003); Jones vertical cartoner (model IMV), tuck closure, with Videojet bottle coder (model 436 serial# 0907307C01ZH), Jones (serial# IMV292); UNI-PHARMA button controls; Ink Jet Marking Machine (model 43S); E-Stop button

(used/preowned)-f4325-1

Filamatic ProLINE Filling Line

Model: Econofil

Equipment information: 2in. x 30in. accumulation table; Filamatic inline 2 head filler (model EconoFIL serial#) 023526 with Filamatic DAB8 dual head pump; Filamatic single head chuck capping head (model CT200 serial #023529) with slat conveyor; electrical: 110-120v/60hz

(used/preowned/built 2020)-f4399-1

Glass Bottle Filling, Capping and Terminal Sterilization Line for LVP

Model: Glass Bottle Line

Equipment information: filler/capper output of 1,100 to 1,500bph, depending on size format parts, included for 100mL, 250mL, and 500mL glass bottles, European voltage; turnkey sterile glass bottle production line for IV fluids; line configured as follows: washing, filling, stoppering, capping, terminal sterilization, visual inspection and semi-automatic labeling; (DF model LF-GV 800/6 bottle washer, built 2020), complies with GMP standards and FDA directives; MEA Pharma Linear Filling and Rubber Stoppering Machine (built 2018) under LAF with in-out conveyor belts, 4-up filling system, fill accuracy +/- 1˝% at 500mL; (DF model GC/4T-R Capper, built 2020) continuous movement model with 4 capping heads by rolls; autoclave sterilization trolleys - 10 trolleys in s/s 316 complete with movable trays, plus 10 under trolleys s/s 304 with wheels; Fedegari (model FOW6/C autoclave, built 2018) super heated water sterilization autoclave, 2 trolleys double door interlocked, capacity: 5mł, 100mL = 6,412 bottles/cycle, 250mL 2,620 bottles/cycle, 500mL = 1,976 bottles/cycle; (DF model SSA/5 ETA1000 visual inspection and semi-automatic labeling, built 2020), checks the vials contents magnified by a video-camera, with selective manual discard, and then applies the label with variable data print; taken off line August 2024

(used/preowned/taken off line August 2024)-hs1822-01

Glass Vial Ampoule Bottle Infusion Filling Line

Model: Filling

Equipment information: capable of filling 200 to 400bpm, depending on the bottle size; currently setup to 3.38oz. (100mL) 49mm D, 8.45oz. (250mL) 66mm D, 16.9oz. (500mL) 78mm D, and 33.8oz. (1000mL) 95mm D glass bottle infusion formats; 1 Fa. Roteg GmbH, 3-axis robot for layer depalletizing of glass bottles, layer separation with plastic liners, positioning position 1: glass pallet, positioning position 2: storage pallet for plastic liners, positioning position 3: receiving table for bottle layer, built 2004; 1 Fa. BOC Edwards Pharmaceutical Systems/IMA Life,type CRW85L, WFA10, RS4-V6 & C3-4 washing, filling and capping system for glass infusion bottles, formats for 100mL, 250mL, 500mL and 1.000mL, updated several times, new controller, CIP/SIP, batch protocols, built 1990; 1 Koenig & Bauer Coding GmbH inkjet printing unit for bottle caps, type Alpha Jet C 55ľ, two writing heads, no. MI 2500-013201, built 2009; 1 Getinge AG hot water cascade sterilizer, type GEC 900-1400-2 (Getinge 3), built 1987; 1 Getinge AG hot water cascade sterilizer, type GEC 900-1400-2 (Getinge 2), built 1991; 1 Getinge AG hot water cascade sterilizer, type GEC 900-1400-2 (Getinge 1), built 1991; 43 Getinge AG s/s sterilization racks, built 2003; 1 GESETE GmbH bottle drying plant, type Highline 104-13, built 2013; 1 Bausch + Strobel Labeler, type ESF 1005. for glass bottles 100-1000 mL, built 1992; 1 Koenig & Bauer Coding GmbH Printer tt-Print including touch monitor, built 2018; 1 Bausch + Strobel labeler, type ESF 1001, built 2001; 1 KBA hot printing device, type Metronic M03.1, built 2011; 1 Leatus Control System Argus WT30, built 2010; 1 Transnova-RUF cartoner V-230 for glass infusion bottles, formats 2x5 pcs. 100mL, 2x5 pcs. 250mL, 2x5 pcs. 500mL and 2x3 pcs. 1000mL, built 2009; 1 Nordson hot glue system, type ProBlue 4, built 2009; 1 GuK online folder for packaging lines, type FA21/6 Cartonac 2000-SP, built 2009; 1 Laetus Pharmacode reading device, type Argus 6012, code reading heads for package leaflet top and bottom as well as carton label and presence printing carton label, built 2009; 1 Clever/Avery label printing (variables) and dispensing system (cardboard face), type ESP DPM 4-ST-L, built 2009; 1 Sartorius belt scale WM35GEP-I000Q, built 2013; 1 Transnova-RUF palletizing unit with empty pallet magazine (Euro pallets), type RP-470, built 2009; complete with control and additional line operating infrastructure; previously used in a pharmaceutical company

(used/preowned)-sJ1371

Inline Filling Systems Liquid Bottle Filling Line

Model: FOFNT48

Equipment information: line was set up to run 64oz. rectangular bottles and 32 oz. square containers with 53mm caps; containers were either front and back or 3 sided wrap on the square bottle; line consists of 45in. D s/s unscrambling table with variable speed drive and square bottle orientor; Inline Filling (model FOFNT48 4) head overflow filler with drip tray; 1in. D nozzles; indexing gating system; washdown capable; Allen-Bradley PLC and color HMI; overflow tank with pump; s/s 4˝in. W conveyor chain; Computorue NT automatic capper (currently set on 53mm caps) with cap size range up to 120mm; container range: H 1˝in. to 15in. x W ˝in. to 7in.; 5.0 LH bulk cap elevator/sorter; Enercon (model Super Seal 75) induction cap sealer with air cooling; Universal CP-1000 front and back labeler with wrap station; Video Jet 1220 Ink jet coder; 45in. D s/s accumulation table

(used/preowned/built 2019)-ae72991001

IVS-REB Piston Filling System

Model: Liquid Filling

Equipment information: inline 6 cylinder piston head filling systems; s/s construction; Maple Systems OIT3160 System Controller; approximate L 10ft. x W 4˝in. Flex Link conveyor; s/s construction; manuals included

(used/preowned)-f4328-1

Kalish Liquid Filling Line

Model: 2200

Equipment information: previously filling up to 30mL bottles with droppers; 36in. Pharmaveyor s/s turntable with infeed; Kalish 2-pump piston filler; on stand with nozzles, manual dropper inserter station, Kalish push through capper (model 5130); cap feeder, LabelStar Inline wrap around labeler; Pharmaveyor slat conveyor, reject station, and discharge rotary accumulation table

Electrical: 110v/1ph/60hz/6 amps

(used/preowned/built 1999)-f4572-1

Kaps All 12 Head Straight Line Filler (reconditioned)

Model: ECF-G

Equipment information: filler is a time and pressure gravity unit with a s/s tank; 6 pumps; 12 filling nozzles; variable speed s/s conveyor; and new touch screen controls; can handle volumes from 1oz. to 1 gallon; reconditioned and is in good working condition

(reconditioned)-a3157

Kugler Monoblock Volumetric Filling Line

Model: Flexofill

Equipment information: 2 piston design with multiple piston sizes; single chuck capper with vibrating bowl cap feeder; change parts for size 1oz., 2oz., 4oz., 8oz. bottles; (model DT-3) Kugler rotary feed table; drawings and manuals included; E-Stop button

Electrical: 480v/3ph/60hz/25 amps

(used/preowned/built 2003)-f3252-52

Liquid Packging Solutions Complete High Speed Liquid Filling Line

Equipment information: approximate speeds up to 100+bpm; filling range: 200mL to 1L; 12 head high speed liquid bottle filler; spindle capper; Aesus wraparound labeller; Domino date coder; turn-tables with bi-direction/flow conveyors; case taper; bottle rinser; UV anitizer and more; last filling 330mL coffee bottles; in good operational condition

(used/preowned/built 2017)-b211223

Liquid Packaging Solutions Eye Drop Liquid Filling Line

Model: FIL-DROP-CAP-02

Equipment information: 45in. TT-SS-L45 rotary loading table, s/s construction (serial# 202012134); CC-RIN-AIR air rinse bottle station, approximately 4in. x 10ft. FlexLink conveyor with ˝hp motor; FIL-DROP-CAP-02 liquid drop capper with filling station, 2 station plug/capper; NJM/CLI BT-RT Beltorque continuous-motion high-speed cap retorquer system; Marburg Industries M-5 GT2 auto cap sealer with MI CR-6000 heat shrink tunnel and LPS (model CON-RB-1004); 24in/ LPS CS-BS-24 section transfer conveyor; Pack Leader USA PL-501 fully automatic wrap around labeling C103 system; 45in. LPS TT-SS-L45 rotary accumulation turntable; stack light; Allen-Bradley PanelView Plus 600; Vari-Drive DC motor speed control; Sure servo AC servo motor; Dayton Blower; stack light; E-Stop button

Electrical: 208v/3ph/30 amps

(used/preowned/built 2011)-f4014-101

Liquid Filling Line (unused)

Model: Square and Round Bottles

Equipment information: filler range: 1 to 10L; 2 cappers; 2 labelers to do spot or wraparound labels; includes heavy duty wide conveyors for large bottles; control panel; (in excellent operational condition)

(unused/built 2022)-b211213

M&O Perry Form Fill Auto Filler

Model: CU-1013

Equipment information: capable of speeds of 20-40 vials per minute, product dependent; 316 s/s product contact surfaces; 304 s/s non contact surfaces; designed for powder and liquid filling, with vial sizes of 10mL, 20mL and 100mL; monoblock design with vial feed table, vial pre-checkweighing, 4 head fill stations with piston fill head, vial checkweighing, stopper inserter, reject station; lip cleaning station and vial outfeed table with tray loading; 10mL vial size range: 1.969in. =/-.02in. H x .935in. =/-.01 W x ˝in. =/-.01 neck; 20mL vial size range: 2.284in. =/-.02in. H x 1.171in. =/-.01in. W x ˝in. =/-˝in. neck; 100mL vial size range: 3.719in. =/-.031in. H x 2.031in. =/-.031in. W x ˝in. =/-.01 neck; all use 20mm stoppers; Allen-Bradley controls with SLC 5/05 PLC controller; Proface operator HMI; system housed in vertical Laminair flow system; s/s construction; inline orientation; E-Stop button

Electrical: 208v/1ph/60hz/40 amps

(used/preowned/built 2011)-f49250

MAR Intermittent Motion Monobloc Vial Filling Line

Model: M53-2R/1S/1A

Equipment information: capable of speeds up to 3,500 per hour, product development; single pitch design unit with 600mm feed table; comb style vial transfer system with pre-nitrogen purge; 2 filling stations with unidirectional volumetric feed pumps +/-˝% accuracy, peristaltic pump for recirculation of suspended fluids; single head stopper inserter with vibrating bowl feeder; single head capper with vibrating bowl feeder; currently has change parts for 10mL and 20mL fills with 20mm stoppers and cap; Siemens Simatic Multi-Panel HMI; Siemens PLC controller; dust filter; vial overturning trolley; drawings and manuals included; E-Stop button

Electrical: 400v/50hz

(used/preowned/built 2005)-f3598-2

Marchesini Sachet Filler

Model: MS235

Equipment information: speeds up to 500 sachets per minute, at up to 75 cycles per minute, product dependent; package size range L 60mm to 150mm x W 25mm; packages individually or in pair with a tear line in between; inline automatic process weight verification with auto-correction of the fill target, explosion-proof, individual coded sachets; currently setup as 8 lane with integrated 8 lane pick and place stacker; Siemens Simatic Panel PC Touch Screen; VideoJet ink jet coding machine; manuals included; E-Stop button; weight 3,800kg

Electrical: 208v/3ph/60hz/24 amps

(used/preowned/built 2017)-f4326-1

Marchesini Tonazzi Diamante Mascara or Lip Gloss Filling Line (never used in production)

Model: Line 6

Equipment information: capable of speeds up to 120 containers per minute, depending on application; mascara and lip gloss twin channel monoblock filling and capping line; intermittent filling with continuous motion capping; container size range: D 10mm to 30mm x H 70mm 0 150mm; filling range: 3mL to 24ML; touch screen HMI control panel for machine operation with self diagnostic and help options; simple size changeover; currently setup to run lip gloss and never used in production, still in original crates

Electrical: 208v/3ph/60hz/24 amps

(never used in production/still in original crate/multiple machines available)-ae72789004

Pack'R Jerrycan Filler

Model: PR10/1050

Equipment information: jug rotary indexing filler and capper; filler has s/s working surfaces infeed and outfeed conveyors with reject system; filler and capper can be manually raised and lowered; pressurized filling tank with a CIP system; 6 filling nozzles that fill by weight and time; Allen-Bradley PanelView Plus 1000 control panel; automatic infeed accumulation conveyor

(used/preowned)-f70934

Pacmac Liquid Filling Line

Model: Pacmac

Equipment information: Accutek 42in. disc unscrambler, variable speed, 115v/1ph/60hz; PacMac (model PGF-12) pressure gravity filler; ˝in. nozzles; 120in. L conveyor with plastic belting, left to right operation; Allen-Bradley MicroLogix 1100 PLC 115v/1ph/60hz; Accutek (model 22-505-000) 6 quill capper with (model 50-COE-CR2) elevator sorter, variable speed; capper capable up to 90mm, single grip container stabilizer 115v/1ph/60hz; 3źin. x 8ft. L bottle conveyor, stainless construction, no side rails, 230v/3ph/50-60hz.; CVC (model 302C) wrap pressure sensitive labeler, rated up to 250bpm, 4˝in. x 10ft. L conveyor; 6˝in. maximum label H, 16in. L wrap belt; label sensor for clear and opaque labels, 3in. core x 16in. D label reel; HMI operator interface controls; PLC controls, 220v/1ph/60hz; Accutek 42in. rotary pack off table, variable speed Elec: 110v/1ph/60hz; air requirements: 80-90psi, 3-5scfm

(used/preowned)-ae73102011

SMARTFILL Liquid Filler and Cartoner (NEW)

Equipment information: maximum speed 60bpm, dependent upon type of fill material, vicsosity and bottle sizes; filling liquid up to 40oz.; SMARTFILL peristaltic pump; dual filler (chuck capper with auto feed caps or eye droppers); conveyors; staging accumulation and infeed table; wrap labeler; bottomless conveyor; thermal inkjet printer; neck bander/sleever; heat shrink tunnel with pneumatic lift; CPT automatic cartorner; optional: inline metal detector and induction sealer

(NEW)-c

TL Bosch Vial Filling Line

Model: MLF3002

Equipment information: up to 120 fill per minute, product dependent; 48in. D accumulation table; vial air cleaner station; 4 head filling station; stopper inserter and capper stations with bowl feeders; unit capable of 1ml to 150mL fills, ˝in. (13mm) to 3˝in. (89mm) vial D, 1in. (25mm) to 7˝in. (191mm) vial H; unit currently setup for 20mL fill; Allen-Bradley touch pad controls

Electrical: 230v/60hz/30 amps

(used/preowned/built 1998)-ae72789004

Tonazzi Vasqauli Millennium Tube Filler

Model: MILL.200

Equipment information: capable of speeds up to 200 tubes per minute depending on fill size; dual filling stations; fill capacity from 3mL-50 mL; tube size range: 10mm-50mm diameter for plastic and laminate tubes, 10mm-40mm diameter for aluminum tubes, 50mm-250mm tube height with cap; currently with change parts for aluminum and laminate tubes, with fill sizes for 30g Alu and laminate tubes, 60g and 45g laminate tubes, 2g Alu tubes; includes model TU751 Roboplacer tube placer with tube magazine

(used/preowned/built 2008)-f4846-1

Pouch Lines...
are Listed Below by Company Name in Alphabetical Order:
(for pictures and information please send an email to ppt@2020comm.net, or, call us at 734.528.0444):

ACS Pouch Form/Fill/Seal Horizontal Machine

Model: QuickPouch Horizontal

Electrical: 2200v/1ph/60hz

(used/preowned)-cE4334

Ames Engineering Corp. Bartelt Style Poucher

Model: IM10-11

Equipment information: poucher with standard unwind and Zipper attachment; Delta bottom seal; zipper crush sealers; feed roller 10in. center with 11 stations; single carrier clips extra high, vacuum bag opener; ElectroCam controller with DirectLogic 06 PLC; light curtain guard; approximate dimensions: W 54in. x L 260in. x H 72in.

Electrical: 208v/3ph/60hz/42 amps/15kva/2hp

(used/preowned)-se33830

Bartelt IM-7 Poucher

Model: IM-7

Equipment information: set for powders; left to right configuration; adjustable plow to single rocker bottom seal; secondary rocker for vertical seal, 7in. indexing with servo style feed roll assembly and knife cutoff; mechanical duck bill opener to bartelt (model D) filling head with agitator converted to servo drive; rocker top closer bars to discharge; Ferguson style chain index; analog relay logic controls with Electrocam control and upgraded door style guarding with safeties; unit ran inline with Videojet 1510 coder; touch screen and button controls; E-Stop button; recently removed from operation

(used/preowned)-se33816

Bartelt IM-9 Poucher (reconditioned)

Model: IM-9

Equipment information: poucher with zipper and gusset attachments; PLC touch screen controls; E-Stop button

(reconditioned)-se13278

Bossar Liquid Pouch Horizontal Form/Fill/Seal Machine

Model: BL-3000/STU

Electrical: 480v/3ph/60hz

(used/preowned/built 2009)-ae71898002

HMC Pouchmaster Horizontal Poucher

Model: IM 8-10

Equipment information: capable of production rates of 90 cycles per minute, product dependent; pouch size range of minimum 2in. x 2in. to a maximum of 6žin. x 9˝in.; maximum gusset size 2in.; complete with parts feed system and checkweigher; stack light; E-Stop button; last used to package medical test kits

(used/preowned)-d4795

Inspire Pack Pre-Made Pouch Line

Model: HFS-210Z

Equipment information: comes with rotary scale and auger; bucket elevator: s/s construction, 13ft. tall, s/s vibratory feeder with hopper, 15in. x 4.75in. x 3ft. deep plastic buckets; 14 head rotary scale: 10 gram to 1,000 gram weight range, s/s smooth buckets, HMI controller mounted on mezzanine; Keyence MK-G Series ink jet printer (NOT INCLUDED); GK Desiccant feeder; auger filler with s/s screw feeder 4in. diameter 8.5-ft long with feed hopper; mezzanine: 7 x 7 x 6ft. tall with stair case and rails; premade pouch machine (model HFS-210Z), pre-formed doy pouches up to 6in. wide x 9in. tall x 3.5in. gusset, single magazine feeder, single fill station, two 7in. wide sealing jaws, size range: 3in. x 3in. up to 6in. x 11.5in.; still installed and can be seen working, (cost to dismantle and secure into a domestic trailer $3,500.00, skidding would be additional cost)

Electrical: 220v/3ph

(used/preowned/built 2019)-u85110

Totani Stand Up Pouch Line

Model: CT-60HVLLLSC

Equipment information: unwind with v fold hole punch attachment zipper attachment gusset former; bag W 60mm to 450mm x bag L 200mm to 600mm; bottom gusset depth, gusset fold W 25mm to 100mm; corner sealing of bottom gusset is available under bag W 410mm

(used/preowned)-ae72404002

Weighpak Swifty Premade Horizontal Pouch System

Model: 3600

Equipment information: rates of up to 2,400 bags per hour for filling stand-up zipper pouches, product dependent; accessible bag magazine to ensure every bag enters the machine square; automatic zipper opening device; bag shaker at the fill station for product levelling; integrated exit conveyor; touch screen control; E-Stop button

Electrical: 230v/20 amps

(used/preowned/built 2020)-se33838

Wolf Mastertech Square Bag Poucher

Model: VPP-250 KVM 10

Equipment information: vertical form/fill/seal bagging machine; capable of producing up to 100bpm, product dependent, for flat, gusseted, block bottom, and Stabil Pack bags; intermittent motion machine for packaging free flowing pourables and paste like products; bag W 50mm to 250mm x L 50mm to 400mm; filling volume 6 litres; Allen-Bradley Panelview 600 controls and Markem Smartdate coder; includes a 2-5/8in. x 5-1/8in. forming tube; no vacuum capabilities, no filler system other than a plunger that was used to push pods into bags; last running a 2-5/8in. x 5-1/8in. x 7˝in. in bag with side seals and bottom gusset

(used/preowned/built 2004)-se33779

Powder Filling Lines...
are Listed Below by Company Name in Alphabetical Order:
(for pictures and information please send an email to ppt@2020comm.net, or, call us at 734.528.0444):

Bossar Powder Sachet Horizontal Form/Fill/Seal Packaging Line

Model: B3200/4

(used/preowned)-sD6326

Spee-Dee Complete High Speed Rotary Powder Filling Line (NEW)

Model: RT0167

Equipment information: 12 pocket rotary auger filler with 36in. base; 3700S twin auger head filler with integrate check weigher; Horizon powder systems; SKA fabricating bottle depalletizer, full height automatic depalletizer; Arrowhead bottle conveyor and lowerator (model GR200-AD-S-RD-3.75-V0300-H0600-0185-0785); New England bulk bott unscrambler with ionized air cleaner (model: NEHCPCL-48); PE Modular SL redundant heat pressure sensitive rotary labeler includes Videojet thermal transfer printer and PE Camera System for label preaence and date code (model: MOD Plus 540-6-M-4P -0-1-0-0-0); New England bulk bottle unscramber with ionized air cleaner (model: NEHCPCL-48); New England machines 6-head rotary chuck capper with cap sorter and feeder (model: NERCC-6, includes change parts for 33mm, 38mm, 45mm, 53mm, 63mm, 89mm, 110mm, and 120mm caps; Polypack shrink bundler (model: Pharma-32D); Douglas Machine Trivex RL case packer integrate diag print and apply case labeler

(NEW)-ch

Sachet and Packet Filling Lines...
are Listed Below by Company Name in Alphabetical Order:
(for pictures and information please send an email to ppt@2020comm.net, or, call us at 734.528.0444):

Viking Masek Multi Lane Sachet and Packet Filling Line

Model: SA600D

Equipment information: capable output of 20 to 60 cycles per minute (functional), up to 80 cycles per minute (test run without product); fully integrated, high-speed sachet packaging system with bulk loading, counting, form-fill-seal sachet packaging, in-line printing, metal detection, and automated cartoning; designed to handle powders, granules, liquids, semi-liquids, and particulates into flexible sachets, with secondary packaging into cartons or caddies; bag sizes: length 50mm to 200mm; maximum tube diameter: 28mm; packaging films: heat-sealable including paper/PE 45/15microns, 12PET/9AI/40PE, 12PET/70PE, 12PET/12AI/50LDPE; film reel capacity: maximum reel diameter 50mm, maximum reel width 1,260mm, reel core 70mm to 76mm; Viking Masek SA600D Sachet Machine: electrical: 3x480v/60hz/27 amsp, multi-lane capacity 1 to 10 lanes, capable of producing 4 side sealed sachets with options for tear notches and easy open systems, designed for powders, dense/fine/loose particulates as well as liquids and semi-liquids; Viking Masek CFM carton packaging machine: (model CFM-B/1/G-30), electrical 230-400v/30hz/30 amps, carton erector capable of running single, double, or triple head operation, handles multiple carton shapes; Viking Masek CLM-1/G-30 support equipment: electrical: 230-400v/60hz/32 amps/24 vdc/9kva/IP44, built 2017; bulk loading and counting: Pharma Packaging Systems feeder with 7 stainless bulk hoppers, 6 vibratory bowls programmable to dispense 1 to 6 each, counting sensors feeding product to bucket conveyor; Sachet Fill & Sealing SA600D, multi-lane vertical packaging machine 1 to 10 lanes; flexible dosing systems volumetric crystalline products; screw doser for powders, piston doser for liquids and pastes, upgraded sealing block and slitter blades; integrated in-house product drop system, 3 Smart Date X65 printers each handling 2 lanes for logos, codes and variable data; product inspection: Thermo Scientific APEX metal detector inline with cleated conveyor after fill; cartoning and case handling: Masek Carton/Cadi Loader with robotic head counts and loads pre-set number of sachets in cartons/cadies; Masek Carton/Cadi Former (CFM-B/1/G-30) with 5 dies sizes, hot melt glue applicator (Nordson ProBlue), suction are feeder for blank or printed cartons, mult-head operation; Masek Carton/Cadi Closer: Viking glue down sealing stations, adjustable for multiple carton widths and heights; turnkey sachet-to-carton line with feeding, counting, sachet forming, printing, inspection, cartoning and sealing; SA600D sachet machine 1 to 10 lanes that supports powders, particulates, liquids and pastes; CFM carton packer with single/double/triple head capability; equipment was used for only 1 shift, running 3 different product configurations, average batch size ran was 3K but the engineering of the machine is designed for much larger batches, like new condition

(unused/built 2017)-chMJK2307

Suppository Lines...
are Listed Below by Company Name in Alphabetical Order:
(for pictures and information please send an email to ppt@2020comm.net, or, call us at 734.528.0444):

Dott. Bonapace Suppository/Ovule Line

Model: BP-10/BP-11/CU-4

Equipment information: capable of speeds up to 6,000 units per hour, product dependent; automatic filling, cooling, sealer, coding/printing and cutting of pre-formed suppositories and ovules containers; BP-10 dosing and filling unit; single filler head; 25L agitated suppository mass melting hopper; micro-doser from 0cc to 3.5cc doses; HMI touch screen; 230v CE rated (serial# 10202003); CU-4 cooling unit; 350 watt fan approximately (6950 BTU/hour) cooling: R-134 refrigerant (requires Freon) 230v, CE rated (serial# 292-20); BP-11 sealing; coding and cutting unit; sealing cycle performed by impulse surface heating; stabilization and cooling in groups of 13 suppositories; Schneider Magelis HMI touchscreen; CE rated (serial# 11201603); videojet ink jet coding machine (model 1220, serial# 20072024C21ZH); weight 450kg; operator manuals included; E-Stop button

Electrical: 230v/60hz

(unused/built 2020)-f4586-1

Dott. Bonapace Suppository Line

Model: BP-10/BP-11/CU-4

Equipment information: automatic filling; cooling; sealer; coding/printing and cutting of pre-formed suppositories and ovules containers; BP-10 dosing and filling unit, speeds up to 6000 units/hour, single filler head, 25 liter agitated suppository mass melting hopper, micro-doser from 0-3.5cc doses, with HMI touchscreen, 230v CE rated (serial# 10202003); CU-4 cooling unit, 350 watt fan, approximately 6950 BTU/hour cooling, R-134 refrigerant (requires Freon) 230v, CE rated (serial# 292-20); BP-11 sealing, coding and cutting unit, sealing cycle performed by impulse surface heating, stabilization and cooling in groups of 13 suppositories, with HMI touchscreen, 230v, CE rated (serial# 11201603); Videojet coder (model 1220, serial# 20072024C21ZH)

(used/preowned/built 2020)-f4581-1

PLEASE NOTE: Pharmaceutical Production TechSourceŽ makes every reasonable attempt to ensure the accuracy of the information we provide for each piece of equipment or part. The purchaser should verify any information or specifications with either their knowledge of the equipment, or, have the equipment inspected by a qualified person. Measurements and shipping weights are approximated or estimated. We are not responsible for any errors or omissions contained in any advertising materials, including this website, as well as any quotation or other documents which may contain a description of the equipment. All quotes are valid for 30 days, and all goods are subject to prior sale. Prices do not include creighting, freight, insurance, taxes, fees, etc.

PLEASE NOTE: Quotes for equipment DO NOT include crating, freight, or insurance costs (CFI), taxes, tariffs, etc. are additional.

Pharmaceutical Packaging Line Maintenance Tips

Maintenance is not only a set of specific functions to help you keep your line in good running condition, it also helps you to maximize output, keep regulatory at bay, identify planable costs, keep production reliable, minimize downtime, and help you keep product quality at a high level.

Mainetnance: involves all activities needed to keep, or, to reach your targeted condition(s)

In addition, it helps you realize and judge the present condition(s) within a respective time frame

Preventive mainetnance: anticipates malfunctions before they casue a breakdown

It's a stratety which considers maintenance aspects already in the design, assembling and installation phase in order to achieve "minimum necessary maintenance"

Planning phase considerations: packaging materials, parts, tools, storage, handling, transportation, equipment, personnel, training, etc...

Technical documentation: make sure that regulatory is involved in the planning phase

Scheduling considerations: changeovers, cleaning, preventive maintenance, corrective maintenance, continuous improvement, etc...

Transparency: ensure that the process is transparent and there is a flow of needed information to all the principals involved

Leadership: identifies all the principals involved and defines their roles

Cooridnates the planning and project budgeting

Planning and scheduling: it's the hub of the maintenance organization

Involved are operations, supervision, accounting, inspection, storage, technical data base development and management, and anyone else you think should participate

Planning is the what you are to do, and the how you are to do it

Scheduling is when the task is supposed to be done, and who is to perform the task

Common mistake is that many people leave out the planning portion of the maintenance function

Planning involves machinery/equipment, station(s), change parts, essential care, parts, materials, permits, tools, skill sets, etc...

Scheduling involves production, maintenance department, service engineering, etc...

Maintenance is performed according to the maintenance plan without interpretation/variation

Training and qualification: ideally, you want your personnel to be able to perform a number of tasks

Training, a sound training program is always a benefit; keep personnel updated with the latest advancements

Qualification basics: machine operator must be competent in machine operation; they should be able to address any format changes; knowledgeable in the basic maintenance needs of their machine; be able to troubleshoot basic problems; and be able to competently train other personnel

Production planning: should always include maintenance planning and they should always "work together", productivity will increase, and it's not only about the machinery

Good maintenance practices: include corrective and preventive maintenance, and contiuous improvement

Corrective maintenance should either be planned and/or scheduled

Preventive maintenance should include essential care, condition monitoring, and fixed time maintenance

Continuous improvement includes design for reliability, design for maintenance, improving procedures, and performance monitoring

Good maintenance mix: includes a number of different strategies for your equipment and line

Operative strategy: includes non-critical parts or functions; doesn't influence other functions; parts and stations are in stock, or can be available in a short period of time

Preventive strategy breakdowns are an unnecessary cost; good for more complex equipment; breakdowns may involve environmental or safety risks; includes equipment that has a well documented breakdown history; it's production hour dependent

Inspection strategy includes breakdowns that are not predictable; condition(s) that can be detected; maintenance depends on the condition of the part; requires regular inspection; development of a method that identifies wear; unnecessary maintenance can be avoided; the process can be easily determined

Strategy mix includes: 20% operative, 10% preventive, and 70% inspection; the mix is flexible according to your needs and specific situation

First step is to define which part/station will be maintained with which strategy

Maintenance process is streamlined to productivity, and the center of that process is your "personnel"

Personnel, you want that person to be self-maintaining (my machine, my area, maintenance is part of production, I am qualified); you not only want them to take pride in their job, but you want them to be qualified and competent

Establish an individual improvement program

Encourage active participation of employees in the improvement process

Changeover considerations: performance of a changeover is dependent upon a number of variables

Equipment: does it have a central tool locking system; format change procedures; individual program format?

Settings, are they in a reproduceable format?

Validation, how will that impact the process?

Calibration: the process relevant parameters of the packaging machine should be calibrated

Following should be calibrated: machine speed; forming air pressure; cooling water temperature; tolerance of sealing tools; temperature distribution of the sealing tools; pressure nuts; temperature of the heating elements; or, anything else you can think of?

GMP Cleaning: "avoid all affects which can have influence on the product in order to reduce the risk for the patients through poor quality or effectiveness"

FDA: equipment and utensils shall be cleaned; written procedures shall be established

Cleaning: make sure all pertinent personnel know their assignment and responsibilities for cleaning; know maintenance and cleaning schedules; describe in sufficient detail the methods, equpment, and materials that are relevant to that cleaning procedure; protect clean equipment from contamination; inspect equipment for cleanliness before using; keep impecable records for maintenance, cleaning, sanitizing and inspection

Microbiological: try to avoid and eliminate microbiological contamination, document all incidences

Mix-ups: prevent in packaging and labeling operations; a major area for recalls

Equipment cleaning: use a log, a written record of major equipment cleaning, maintenance, etc.; according to the FDA, "if it's not documented, it's not done"

Line cleaning validation includes: components "in" contact with the product; and components "not" in contact with the product

Components "in" product contact: feeding system, thermoforming machine

Components "not" in product contact: cartoning, stretch banding machine, and casepacker; finally, visual cleanliness

Cleaning procedure recommendations: create individual cleaning validation scenarios for all kinds of possible changeovers; have backup parts for product contact parts and feed system parts; make sure your personnel are well trained in the cleaning, operating and maintenance of your equipment

Maintaining Packaging Line Equipment Tips

Benefits of pairing autonomous and preventive maintenance strategies result in an increase in planned maintenance over unplanned, the maximization of equipment availability, and improves your ability to forecast production capacities and maintenance budgets with greater precision

Mainetnance: is critical to minimizing downtime, keeping cost(s) low, and allows you to reap the benefits of an optimized packaging line

Right strategy, a proper spare parts inventory, upgrades, and vendor support will help you maximize your operation

Preventive mainetnance: the most basic of maintenance advice

Maintenance personnel conduct the preventive maintenance tasks, i.e., electrical or mechanical personnel, dedicated maintenance personnel, etc.

Tasks are scheduled as needed; daily, weekly, monthly, etc.; strict adherence to that schedule should be followed; timed maintenance activities are designed to prevent issues before they happen; preventive maintenance personnel tend to have a higher skill set, and can handle a larger operations because the need for emergency maintenance is reduced

Value of preventive maintenance is being able to plan downtime and necessary materials, rather than being confronted by a unexpected problems

Autonomous maintenance strategies: this a checklist based strategy that focuses on basic cleaning and inspection routines performed by the operator

Operators are usually the experts of their machinery, and the first line of defense for maintenance; well-trained operators can assist in diagnosing machine performance issues

Checklists tell the operator when to perform specific tasks and what is the specific outcome

In a good packaging operation every person is knowledgeable and critical to ensuring a reliable operation

Companies that combine the skills of designated maintenance personnel for "preventive maintenance" with those of experts running the machinery, "autonomous maintenance" personnel, see the benefits of planned maintenance over unplanned maintenance, maximized equipment availability, and the ability to forecast production capacities and maintenance budgets more precisely

Wear components and critical spare parts: have a plan in place to replace these components; try and have these parts in your inventory

Inventory these parts because of their critical nature to your operation

Downtime results when having to wait for a part, whether it being a few minutes, or a few days

Consult the equipment manufacturers about which components are most critical to your operation, and should be kept in inventory

Parts inventory levels are based in part on the stress to the line, machine manufacturers will help you determine your parts criticality; manufacturers and packagers are concerned with the funds and space that are tied up in extensive parts inventories, be precise in your inventory needs

Manufacturers: choose one who can help you in a pinch

Support, make sure your line manfacturer is able to support your needs via telephone, computer, etc.; ideally, you would like support from a field representative within a reasonable period of time; you would like access to field support on an emergency, or planned basis

Installation and training are of the utmost importance; your ideal situation is to esnure vertical startup of the line with new equipment

Upgrades: plan to upgrade equipment software and hardware periodically in order to avoid obsolescence

Typically, electronic control and computer systems hardware and software become unsupported at some point in time

Plan ahead for upgrades so your components don't become obsolete, and your software outdated; you can integrate this into your annual maintenance planning, and most leading manufacturers will support your needs; most leading manufacturers update their machinery and proactively address obsolescence issues

Line excellence: by integrating your preventive maintenance plan and your operator autonomous maintenance strategies, you'll improve your packaging line's performance

Maintenance strategy, by strategically planning your parts inventory, upgrading components when necessary, and getting needed assistance from your equipment manufacturer will help improve your packaging operation

Effective maintenance strategies help you avoid unplanned repairs, increases planned over unplanned maintenance, increases equipment availability, improves your ability to predict production capacities and maintenance budgets, and allows you to do more with maintenance personnel

PLEASE NOTE: Quotes for equipment DO NOT include crating, freight, or insurance costs (CFI), taxes, tariffs, etc. are additional.

Top of Page